| Category |
Albums |
Files |
|
8 |
614 |
|
| 614 files in 8 albums and 1 categories with 5 comments viewed 3,775,908 times |
| Random files |
6BQ5-Push-Pull-Tube-Amp.jpg6BQ5 / EL84 Push-Pull (PP) Tube Amp4485 viewsTube amplifier built on the basis of the Schematic from 6BQ5 / EL84 Push-Pull (PP) Tube Amp.
|
|
Push-Pull-6F6S-286F629-Tube-Amp-with-ECC82-driver.jpgPush-pull 6F6S (6F6) Tube Amplifier with EСС82 input3264 viewsPush-pull 6F6S (6F6) amplifier. The input stage is an EСС82 with a large anode. The amplifier has been built into an old HP 5.25" floppy drive (fantastic steel!!!).
The input stage is made by Williamson, after the phase shifter with a split load and paper-in-oil capacitors. Displacement of the output stage is automatic, inclusion of a pure pentode. The amplifier operates in pure class-A. The output stage can be used with 6P6S and 6V6 tubes without any changes. There is no feedback used in this amp. The cathode resistor of preamp halves EСС82 are NOT capacitor shunted. The input connectors are Amphenol BNC and the output contacts are from an old laboratory equipment HP.
With best regards,
Rakhmanov Ilya (Рахманов ИльÑ), Moscow, Russia.
|
|
6CA7_Tubes_in_Philips_EL6431_Amplifier.jpg6CA7 Tubes in a rebuilt Philips EL6431 Amp2829 viewsThe four 6CA7 (EL34) output tubes of the Philips EL6431 amplifier. See the other photos in the gallery and there is also more information and photographs in the 120 watt Philips EL6431 (EL34/6CA7) Tube Amplifier thread on the forum.
Alan (Canada)
|
|
6EM7-Tube-Power-Amp-Arabella.jpgArabell - 6EM7 Tube Power Amp3951 viewsInspired by a beautiful Acacia, heavy, chopping board I fashioned this excellent sounding single-ended 6EM7 tube power amp (Arabella). To hide wiring a shallow aluminum skirt is tucked up underneath. Smaller components also reside here. Larger power supply caps are housed in a “trunk†at the back where the RCAs and gold plated speaker binding posts are also located. Tubes are Dutch made AWA NOS and Sovtek 5Y3. A large Hammond power transformer (370EX) and Hammond 20H 100mA choke (193C) grace the gorgeous wooden top plate. Edcor GXSE (GXSE10-6-5K) audio output transformers stand proud and blue to give this build a striking look and super clean pure sound. I love the amp for its looks and sound, all 2.5W of it.
Mark Houston – retro-thermionic
UPDATE - June 2015 - see the 6EM7 Single-Ended Triode (SET) Vertical Amplifier project page for the latest revision of this amplifier.
|
|
| Last additions |
DIY-6AS7-Tube-Headphone-Amplifier.jpgDIY 6AS7 Tube Headphone Amplifier6969 viewsMy name is Laurie. I have been building and DIYing for 45 years now and happily will never stop. This tube headphone amp is from a thread in the Form.
The power connecting cable comes from a European Travel Iron I bought for $1.00 at junk shop. (220v/6A) They will be shortened when I find a perch for the amp and me. The sound is better than my ears have ever heard so I will be keeping this one for my retirement entertainment should such a time ever come. Wink It has worked from day one and continues to please me every time it is turned on. The tubes are JJ ECC88 / 6AS7 with a 5V4 rectifier tube. To spite it's small size the parts are quite easily accessed. I over built most components so it will outlast me I fear. The only change I anticipate may be the 6AS7 to a bottle neck glass to match the rectifier tube. I do have and use a 6080 tube, but i can tell no difference in sound. It will take more then a few hours of listening to get my ears better tuned.Feb 28, 2017
|
|
4-channel-400W-amplifier.jpg 4 channel, 400 W amplifier5976 viewsThis 4-channel 400 W amplifier uses Hypex UcD400HG modules together with the corresponding power supply.
The whole is mounted inside a Galaxy 330 x 230 x 80 case.
For building instructions, have a look at this project's wiki.
Two such amplifiers has been working for over 2 years in my lounge, driving Linn Komponent 110 loudspeakers which each have 4 speaker inputs.
Francois Corthay - Switzerland
Project Page: 4 channel 400 W amplifier using Hypex UcD400HG modules Dec 20, 2015
|
|
E88CC-SV83-SET-Amplifiers.jpgDual SV83 SET Amplifiers6207 viewsA mirrored pair of SET amplifiers, presently being used in bridged mode. All P2P construction using silver solder. I included a "Hazen grid" capacitor and input tube bias change switch. The single mA meter displays individual output tube bias current with a Left/Right switch. Edcor XPRW178 power transformer and GXSE10-6-8K output transformers. Upgraded caps to Jantzen Audio 1200V Z-Superior. Upgraded resistors to PRP PR9372 Audio for metal film and TAKMAN REX for carbon film. ALPS Blue 100K attenuator. The power supply uses a RCA 5U4GB rectifier and Hammond 156R choke. Matched pairs of Svetlana SV83 for power and JJ E88CC for the input tube.
Billy Whiten - Georgia, USADec 20, 2015
|
|
6V6-Push-Pull-Amplifier.jpgPush-Pull (PP) 6V6GT Tube Amplifier5163 viewsThis 6V6 amp was built following the DIY Push-Pull (PP) 6V6 / 6V6GT Tube Amplifier Schematic. Power Supply transformer and Output transformers are handmade in Argentina by NavasBaccino. I'd like to thank Brad S. for the help. The sound is amazing and clear, free of distortion.
Gabriel Rofrano, ARGENTINA
Video link
Dec 20, 2015
|
|
|
