BoZoaC - Bride of Zen on a Cap

After building a number of Bride of Zen (BoZ) preamplifiers I realised the whole circuit could be built on larger parts of itself. Here the whole BoZ circuit is constructed on the large output capacitors. The output caps are 10uF 100V polypropylene types. These were taped together along with two 1000uF of low ESR storage caps. Parts have been reduced to minimum size to keep signal path short and super glued to the rest on the cct. Silver solder and wirewrap wire is used throughout construction. There are two switchable inputs and the preamp can be powered by internal batteries (3 X 9V lithium) or an external supply. A bitumen and Al lined, non-magnetic low resonance ABS plastic case was used. Mongrel Dog Audio