Aussieamps nxV200 V-FET 200W Amplifier

I was given the task to assemble two complete stereo amps based on the Aussieamps nxV200 V-FET amp modules. These are exquisitely made extremely compact amp modules based on two large and very powerful V-FETs. The remaining components are surface mounted (SMT). To achieve 200W into 4ohms a +/- 56V was required. The toroid transformer has 40V windings and 20,000 uF 100V caps (per rail and snubbed) are used. Four fast high surge diodes (each snubbed) made up the rectifier.

OFC medium gauge speaker wire was used for hook-up with silver soldier. Large brass cones
hold the amp high off the ground for cooling and resonance control.

The sound is pristine, clean and clear. Stereo image is detailed and 3D holographic. This amp will play extremely loud when pressed showing no signs of harshness or stress. I recommend the amp modules.