Peerless and Seas 2-way Towers in Zebrawood

The fun part about building these speakers was the crossover design with a Zobel and Baffle Step Compensation (BSC). I wanted to try a larger driver than a 6.5 inches. I am really pleased with the sound and image. Unbelievable sound for the cost. The crossover uses open air inductors and Solen capacitors. The Veneer is Zebrawood adhesive backed. I was able to match the grain on both sides and the fronts. One coat stain and finish followed by paste wax. The speakers are drying in the garage awaiting the living room. Next is a pair of open baffle 3 way with active cross using DIY chip amps.