I'm running this stock apart from the Alps Blue volume pot which I upgraded after the original sprang a leak. I'm using quite a few components bought from: http://www.mafaudio.com/pro/propage.aspx.

There are seven LED's that light up the feet and fronts of the brushed aluminum transformer cases. The LED's are powered from a 12v mains transformer bought from Maplin in the UK. The VU meters also run from the extra transformer. The chassis is made from wood bought from the local yard. To cut the VU meter holes I used a 32mm Spade bit then used a file to open the hole up to just under 34mm. The main volume control area was drilled using a 50mm Forstner bit and the tone controls a 30mm Forstner bit. It's coated in about 5-6 coats of clear varnish and involved an awful amount of sanding.

There are more photos available in my photo library.

Luke Collings,
Wiltshire, UK