DIY Audio Projects Photo Gallery

DIY Audio Projects Photo Gallery

[ Gallery Home | Upload Photo | Recent Uploads | Most Viewed | Search ]


Welcome to the DIY Audio Projects Photo Gallery. Please feel free to upload and share your DIY Audio photographs. Note that new uploads will not be visible until they are approved by a moderator. If you have problems uploading a picture, you can email the photos to us along with a description and we will add it to the photo gallery.

You can follow new additions to the Photo Gallery by subscribing to the Photo Gallery RSS feed.



 FostexFE206E in Double Bass Reflex Speaker Enclosure
FostexFE206E in Double Bass Reflex Speaker Enclosure
This is the simpler enclosure recommended by Fostex for their high sensitivity FE206E drivers. The large magnet and basket spokes of the driver have been covered with bituminous damping. The upper chamber has sound deadening vinyl across the back and the rest of the upper chamber has double layers of thick Dacron lining it. The boxes are fastened using dowels, glue and wood screws. A Speaker Zobel / Impedance Equalization Circuit is used across the driver terminals. The sound soundstage is pin-point sharp and with good depth. Bass is sufficient without being heavy. For under $AU500 these speakers represent very good value. With a sensitivity of 96 dB/W my 6 W Ultra-Linear Single-Ended valve amps can produce a high sound level.
DIY-Vacuum-Tube-Prototype-Bread-Board.jpg FE206ES.jpg MerlotJJSGallery.jpg KitAmpTopSmall.jpg KitAmpUnderSmall.jpg

DIY Tube Projects :: DIY Speaker Projects :: DIY Chip Amp / Gainclone Projects :: DIY Solid State Projects :: DIY Audio Cable Projects