DIY Audio Projects Forum
http://diyaudioprojects.com/Forum/

"The Beast" 6336 Dual SET Amplifier
http://diyaudioprojects.com/Forum/viewtopic.php?f=9&t=5896
Page 2 of 7

Author:  mwhouston [ 21 Nov 2017, 18:36 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

Wow, there is some big iron there.

Author:  Suncalc [ 22 Nov 2017, 11:13 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

Total amplifier weight (with tubes): 23.6 pounds (10.7 kg)

I bet the Silver Dragon weighs more. ;)

Author:  Geek [ 22 Nov 2017, 14:13 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

Suncalc wrote:
Total amplifier weight (with tubes): 23.6 pounds (10.7 kg)


She's just a lightweight :up:

Author:  Soundbrigade [ 22 Nov 2017, 14:24 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

My Russian monoblocks (6x6L6) are 17 kg each.
May time to start building my GU-72 monoblocks. They may come out heavy too.
Now that I see tjis one, I realize that I could use my Hammond 1627 for this kind of amp with that tube.

Author:  mwhouston [ 22 Nov 2017, 17:00 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

Suncalc wrote:
Total amplifier weight (with tubes): 23.6 pounds (10.7 kg)

I bet the Silver Dragon weighs more. ;)

Yes the seperate PS and amp section weighed 15kg each.

Author:  Suncalc [ 26 Nov 2017, 20:15 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

I have provided a more detailed writeup on this amplifier here: http://www.cascadetubes.com/the-6336-set-amp/
Attachment:
The_Beast.jpg
As always, questions or comments are more than welcome.

Author:  Geek [ 27 Nov 2017, 01:25 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

Amazing work! :thumbsup:

Love that cabinetry 8-)

Author:  mwhouston [ 27 Nov 2017, 02:53 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

I think Matt has a double passion.

Author:  ToddD [ 31 May 2018, 20:57 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

Matt,
Another great looking amp and one I am itching to build.

Note on the signal schematic. The signal schematic attached to the write up on your website shows a 470 and one as 470K resistor. This schematic shows both 470K.

Anymore comments on "the Beast" after living with it for awhile?

Thanks

Author:  Suncalc [ 03 Jun 2018, 10:53 ]
Post subject:  Re: "The Beast" 6336 Dual SET Amplifier

ToddD wrote:
Note on the signal schematic. The signal schematic attached to the write up on your website shows a 470 and one as 470K resistor. This schematic shows both 470K.
You are correct. The schematic on my website contains an error. The grid resistor on signal stage two is 470kΩ and not 470Ω.

Sorry about that.

Page 2 of 7 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/