|DIY Audio Projects Forum
|srpp output section on my dac
|Page 1 of 1|
|Author:||firstname.lastname@example.org [ 03 Mar 2017, 06:40 ]|
|Post subject:||srpp output section on my dac|
Hope someone can help me, I'm trying to use 2 126b hammond transformer instead capacitors on the srpp output section on my dac.
I'me sure I've respected the wires colors:
Brn-Blu primary, the Brn connected to the signal and Blu to the Ground
Grn-Blk secondary, the Grn connected to the output signal and Blk to the ground.
I have only noise, dc at the secondary and no Ac at all!!!!!
the srpp out has 230v around dc and 1.9 Ac, with capacitors work with no flaws.
to avoid ground loops only one side is connected to the amp.
|Page 1 of 1||All times are UTC - 6 hours [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group