|
Recently I started a Filmosound conversion as my first tube project ever. My goal was to used the old transformers (which both check out) and clone a Fender Deluxe.
After reading several conversion stories I settled on a schematic that looks good to my untrained eye. I don't think I'm completely off the rails, but I really don't have the design chops to evaluate it without actually plugging in the variac and bringing it up to speed.
Before I do that and possibly get what SpaceX refers to as a "rapid unscheduled disassembly," I'm hoping anyone interested could take a look at my schematic and give my any feedback you can. I'm a long-time guitarist but new to tube amp design so I'll take any kind of advice or criticism you have to offer.
Here's the proposed schematic I used to convert the amp. I have the B&H original schematic but so much has been changed/discarded that it wouldn't help--it contained a lot of extraneous oscillator/sound-reading circuitry.
Thanks in advance!
This post has a file attachment. Please login or register to access it. Only Registered Members may view attached files.
|
Login
Register
FAQ
