DIY Audio Projects Forum
http://diyaudioprojects.com/Forum/

Ideas on making a twweter aimable
http://diyaudioprojects.com/Forum/viewtopic.php?f=11&t=5454
Page 1 of 1

Author:  proufo [ 16 Jan 2016, 09:29 ]
Post subject:  Ideas on making a twweter aimable

Hello all. This is my first post here.

I'm looking for ideas on how to make the tweeter of a JBL Control 5 loudspeaker (used as a center, upside down) aimable.

Glad to be here.

Many thanks in advance and best regards.

Author:  mwhouston [ 22 Jan 2016, 19:45 ]
Post subject:  Re: Ideas on making a twweter aimable

Try an L pad to drop it 3 to 6 db. Ensure a 2uf cap in series before the pad. An image would be nice and meashure the DC resistance.

There are L pad calculators on the net. Good luck.

Author:  proufo [ 25 Jan 2016, 08:11 ]
Post subject:  Re: Ideas on making a twweter aimable

mwhouston wrote:
Try an L pad to drop it 3 to 6 db. Ensure a 2uf cap in series before the pad. An image would be nice and meashure the DC resistance.

There are L pad calculators on the net. Good luck.
Hello mw and many thanks for your reply.

I meant to aim it geometrically/physically. The way I'm mounting the speaker aims the tweeter too much off the listening area.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/